Upgrade your BCview to Version 7.905

In case your current BCview version is less than 3.00E (e.g. 3.002 is less than 3.00E) you must install version 3.00E before you can install version 7.905.
When version 3.00E is installed you must run Diagnostic (menu 'Etc'/'Diagnostic') with function, indicator and signal recompile.
It is not possible to install version 4.000 or never before this recompilation is done - How to upgrade to version 7.905


Download version 3.00E
The procedure is, that you download the new version into 3 discs and afterwards you had to import the discs from menu 'Etc./import data' in BCview (How to upgrade from the disc's)

Create disc 1:
Insert an empty and formatted disc and press DISC 1
(select run program from current destination (OPEN), because disc1.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

Create disc 2:
Insert an empty and formatted disc and press DISC 2
(select run program from current destination (OPEN), because disc2.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

Create disc 3:
Insert an empty and formatted disc and press DISC 3
(select run program from current destination (OPEN), because disc3.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

In case you are not able to download executable files (as above) - alternative you can download the ZIP files.
Afterwards you must UNZIP the files DISC1.ZIP, DISC2.ZIP and DISC3.ZIP to 3 disc's.
Download DISC1.ZIP, DISC2.ZIP and DISC3.ZIP


Remember : You must run Diagnostic (version 3.00E) with function, indicator and signal recompile - before version 7.905 can be installed.

Download version 7.905
The procedure is, that you download the new version into 3 discs and afterwards you had to import the discs from menu 'Etc./import data' in BCview (How to upgrade from the disc's)

Create disc 1:
Insert an empty and formatted disc and press DISC 1
(select run program from current destination (OPEN), because disc1.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

Create disc 2:
Insert an empty and formatted disc and press DISC 2
(select run program from current destination (OPEN), because disc2.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

Create disc 3:
Insert an empty and formatted disc and press DISC 3
(select run program from current destination (OPEN), because disc3.exe is a packed file, that must be unzipped)
(unzip to folder A: and finally pres 'Unzip')
When unzipped to disc press 'ok' and finally 'close'.

In case you are not able to download executable files (as above) - alternative you can download the ZIP files.
Afterwards you must UNZIP the files DISC1.ZIP, DISC2.ZIP and DISC3.ZIP to 3 disc's.
Download DISC1.ZIP, DISC2.ZIP and DISC3.ZIP